ProDip Acrylic Base

Self-leveling gel resin with a thin to medium viscosity is chemically matched to work with the ProDip Acrylic Dipping System, this Base is formulated to adhere to the natural nail plate and to absorb the right amount of ProDip Acrylic Dipping Powder.

The second step in the ProDip Acrylic Dipping System. Self-leveling gel resin with a thin to medium viscosity is chemically matched to work with the ProDip Acrylic Dipping System, this Base is calcium and vitamin enriched and is formulated to adhere to the natural nail plate and to absorb the right amount of ProDip Acrylic Dipping Powder.

The base is slower drying than the finish gel and has more flexibility.

No Ethyl Methacrylate, HPMA, HEMA, or TFEMA

Ingredients: Ethyl Cyanoacrylate, Tocophenyl Acetate, Retinyl Palmitate, Calcium Pantothenate

Pre-Application:

Before you begin any nail application, be sure to follow the 6 steps listed below:

1. Sanitize your hands and clients hands.
2. Remove any trace of nail lacquer if any.
3. Perform a dry manicure by gently pushing back the cuticle, removing the excess cuticle (pterygium) with a cuticle nipper.
4. Using a180 grit SuperNail Wave File, shape the nail and lightly buff the shine from the nail plate.
5. Remove the filing dust with a clean SuperNail Cleansing Wipe.
6. Apply 1 coat of ProDip Prep to each finger and allow it to dry.

Application – One Colour Natural Nail Overlay:

1. Select desired colour of ProDip Powder and pour into disposable dipping tray.
2. Apply 1 coat of ProDip Prep to each finger and allow it to dry.
3. Apply a coat of ProDip Base to the pinkie of one hand and carefully slide finger forward into the colour powder making sure to cover the entire nail bed and tap off excess powder.
4. Repeat the above step on all ten nails.
5. Gently dust off excess powder from all nails with a dry SuperNail Cleansing Wipe.
6. Repeat the dipping process on all ten nails making sure to evenly cover the entire nail bed and firmly close the Pure Dip Base cap.
7. Gently dust off excess powder from all nails with a dry SuperNail Cleansing Wipe.
8. Apply a generous amount of ProDip Activator to all ten nails making sure to cap the free edge.
9. File and shape all nails with a 180-grit SuperNail Wave File and buff smooth.
10. Using a dry SuperNail Cleansing Wipe, remove dust from all nails making sure no dust particles are left on the nail.
11. Re-apply the ProDip Activator on all ten nails.
12. IMPORTANT: Without pausing between fingers, apply a coat of the ProDip Finish Gel to one hand only and immediately apply a second coat of ProDip Finish Gel to that same hand. Do not over brush the second coat, limit to three strokes per nail.
13. Repeat the above step on the other hand.
14. Let the Finish Gel dry for 2 minutes before applying ProDip Cuticle Oil.

Removal:

1. Remove the shine from the nail surface using a 180-grit file.
2. Soak a cotton ball or pad with acetone and wrap in foil, leave it on the nails for 10 minutes.
3. After the ten minutes, remove the foil and with the cotton, press and remove the product off of the nail. The product should have a gummy consistency and should be removed easily.
4. File and buff any remaining product.