ProDip UV / LED Sealant 14ml

A no-cleanse, light-activated gel that is the perfect finishing step for extremely glossy and durable nails.

An optional step in the ProDip Acrylic Dipping System. Use in place of the Finish Gel for extremely glossy and durable nails. LED & UV Curable.

No cleanse, no buffing top coat.

No chipping, spiking or pitting.

Non-yellowing with a mirror finish.

Ingredients:

Di-HEMA Trimethylhexyl Dicarbamate, Dipentaerythrityl Pentaacrylate, Ethyl Methacrylate, Hydroxycyclohexyl Phenyl Ketone, Benzoyl Isopropanol, Ethyl Trimethylbenzoyl, Phenylphosphinate, Violet 2 (CI 60725)

Pre-Application"

Before you begin any nail application, be sure to follow the 6 steps listed below:

1. Sanitize your hands and clients hands.
2. Remove any trace of nail lacquer if any.
3. Perform a dry manicure by gently pushing back the cuticle, removing the excess cuticle (pterygium) with a cuticle nipper.
4. Using a180 grit SuperNail Wave File, shape the nail and lightly buff the shine from the nail plate.
5. Remove the filing dust with a clean SuperNail Cleansing Wipe.
6. Apply 1 coat of ProDip Prep to each finger and allow it to dry.

Application – One Colour Natural Nail Overlay:

1. Application – Pink and White or Clear and White French Manicure:

1. Select desired colours of ProDip Powders and pour into disposable dipping trays, use separate trays for each colour.
2. Apply 1 coat of ProDip Prep to each finger and allow it to dry.
3. Apply a coat of ProDip Base to the entire nail of the pinkie and carefully slide finger forward into the white powder to create a crisp smile line.
4. Immediately dip entire finger into the pink or clear ProDip Powder in the other tray and tap off excess.
5. Repeat the above step on all ten nails.
6. Gently dust off excess powder with a dry SuperNail Cleansing Wipe.
7. Repeat the dipping process on all ten nails making sure your smile lines are crisp and firmly close the ProDip Base cap.
8. Gently dust off excess powder with a dry SuperNail Cleansing Wipe.
9. Apply a generous amount of ProDip Activator to all ten nails making sure to cap the free edge.
10. File and shape all nails with a 180-grit SuperNail Wave File and buff smooth.
11. Using a dry SuperNail Cleansing Wipe, remove dust from all nails making sure no dust particles are left on the nail.
12. Apply a thin coat of ProDip Led / UV Sealant to four nails of one hand making sure to cap the free edge.
13. Place hand in LED or UV lamp and cure 30 seconds in LED and 3 minutes in UV, there is no need to cleanse the nails afterwards.
14. Repeat the above step on the other four fingers of the other hand.

15. Repeat the ProDip LED/UV Gel Sealant step on both thumbs and cure. Dispose of dipping trays along with used powders in waste receptacle.

Removal:

1. Remove the shine from the nail surface using a 180-grit file.
2. Soak a cotton ball or pad with acetone and wrap in foil, leave it on the nails for 10 minutes.
3. After the ten minutes, remove the foil and with the cotton, press and remove the product off of the nail. The product should have a gummy consistency and should be removed easily.
4. File and buff any remaining product.